1. The larger the size of the LCD splicing unit, the greater the power consumption?
In the LCD splicing industry nowadays, large size, energy saving and environmental protection have become unparalleled hot trends. However, for many buyers, it has become the helplessness of "cannot have both fish and bear's paws", because in many people's potential consciousness, large size will bring high power consumption? This is not the case. Related scientific research has found that the power consumption of LCD splicing units of different sizes does not change much. For example, the mainstream products on the market 46-inch, 50-inch and 60-inch LCD splicing screens consume roughly the same amount of power under the same conditions. . Strictly speaking, the power consumption of the LCD splicing screen is determined by the number of LCD splicing units. The larger the number, the greater the power consumption of the screen. Therefore, if the customer has a large-size screen application requirement, choose a large size To reduce the number of splicing units, it will be more energy-saving.
multi-screen
2. The thinner the LCD splicing screen, the better?
The thinner the product, the higher the requirements for the manufacturing process. If the manufacturing process is unqualified, not only the color displayed on the screen will become dim, but the visibility angle will also become smaller. In addition, the probability of occurrence of dead pixels on the screen will also be reduced. Will increase, and the yield of products will decrease. Therefore, it is necessary to comprehensively consider the production process, display color, visibility angle, etc. to make a selection when purchasing.
Third, the LCD splicing screen will definitely not show color difference?
It is well known that the color of DLP splicing screen will weaken after being used for a while, that is, the color difference, which affects the application effect. Then, does the LCD splicing screen really have poor color? In fact, it is not not, but it is slower. The color of LCD splicing screens will also be weakened after being used for a while, and this type of weakening is irreversible, but weakening does not occur often, and for this, many manufacturers have certain adjustment methods, so it effectively increases the service life.
4. Will there be no temperature limit when using LCD splicing screen?
If you want to ensure the efficient use of LCD splicing screens, the temperature of the surrounding environment is a factor that cannot be ignored. Under normal circumstances, the best operating temperature for LCD splicing screens is between 0 and 40 degrees Celsius. Because the thermotropic liquid crystal used in LCD screens is derived from temperature changes, and its photoelectric effect is controlled by temperature, if the temperature is not used in it Within the temperature range, it is equivalent to getting rid of electric field control without photoelectric effect, and various problems will occur. In specific applications, if the ambient temperature conditions are harsh, it is recommended that customers install air conditioners and set the temperature between 25 to 26 degrees Celsius to ensure that the LCD splicing wall is in a better working attitude.
