Scanning method of touch screen

Jul 02, 2021

Læg en besked

The projected capacitive touch screen senses touch in a scanning manner, that is, each independent electrode or electrode intersection is measured one by one in a cyclic scanning manner. Since each electrode is individually connected to the controller, the self-capacitive touch screen uses a simple sequential scanning method; while the mutual-capacitive touch screen uses a more complex scanning mechanism, that is, the full arrangement and combination measure each pair of cross electrodes. This scanning The type is usually called full-point addressing. The controller drives one column as driving electrodes, and then scans all horizontal rows (Z) as sensing electrodes to measure the capacitance value. After completion, it drives the next column 00, and then scans all U) to measure the capacitance value. , After each column has been scanned, the whole scene starts again. This makes the processor load of the mutual capacitive touch screen relatively high, but it supports true multi-touch. The current scan rate range of the projected capacitive touch screen processor is about 20 200HZ (ie 5 50ms per field); according to the 3.5in smart phone touch screen has 9 columns and 16 rows, then each field needs to scan 144 pairs of capacitors.

  In the two types of projected capacitive touch screens, in order to calculate the precise touch position, it is necessary to comprehensively calculate the continuous change of the capacitance value of the adjacent pole or cross electrode pair for inserting the precise touch coordinates. The result of this is accurate and M higher resolution, up to 1024 x1024 (lObit). Scanning has another advantage, that is to prevent drift, because drift is limited to each small area formed by the electrode, and because the problem of drift is solved, as long as it is safely connected to the display, the projected capacitive touch screen no longer needs the end user Calibration.

In the case of normal and single-point touch, start the self-capacitance scanning method to give full play to its advantages of fast scanning speed and simple algorithm. In the case of multi-finger touch, start the mutual capacitance scanning method to give full play to its ability to identify More real advantages. Both self-capacitance and mutual-capacitance scanning methods have their own advantages and disadvantages. A mature solution must combine the advantages of self-capacitance and mutual capacitance to give full play to their respective advantages while shielding their respective shortcomings.

Send forespørgsel