Berøringsskærmen alt-i-en maskine er sammensat af avanceret berøringsskærm, bundkort, hukommelse, harddisk, grafikkort og andre elektroniske komponenter, hvilket er det samme som arbejdsprincippet for traditionel pc. I dag vil jeg i detaljer fortælle om den sunde fornuft ved at bruge berøringsskærmen alt-i-én maskine.
Berøringsskærm alt-i-én maskine
1. The touch screen part is made of glass, and the glass corners are relatively sharp. Gloves/finger cots are required for assembly.
2. The touch screen part is glass fragile. Don't apply strong impact to the touch screen during assembly.
3. The touch screen film surface is the touch surface, that is to say the front of the product; the glass surface is the non-touch surface, that is, the back of the product.
4. Avoid directly taking the lead wire and picking up the touch screen, and avoid pulling the lead wire.
5. The lead wire reinforcement plate cannot be bent.
6. Any part of the lead wire is not allowed to be folded in half. When assembling, the lead wire must be inserted horizontally, and cannot be inserted in half at the root of the reinforcing plate.
7. Single-chip operation is required when picking and placing the product, and handle with care to avoid product collision and scratches on the surface of the product.
8. When cleaning the surface of the product, please wipe with a soft cloth (deerskin) dipped in petroleum ether.
9. Do not stack touch screens, use trays.
10. Finally, pay attention: Do not use corrosive organic solvents to wipe the surface of the touch screen film. Such as industrial alcohol, etc...
